Views:1 Author:Site Editor Publish Time: 2020-07-14 Origin:Site
Do you know what are the similarities between bridge crane pendant controls and overhead crane pendant control, and what are the differences? In fact, they are all one of pedant crane control.I will explain it to you below.
What are they?
Common advantages and operational safety
Bridge cranes are lifting equipment that traverses materials in the workshop, warehouse and stockyard. Because its two ends are located on tall cement columns or metal brackets, they are shaped like bridges. The bridge of the bridge crane runs longitudinally along the rails laid on the elevated sides of the bridge, which can make full use of the space under the bridge to lift the materials without being obstructed by the ground equipment. It is the most widely used and largest number of lifting appliances.
Elevated cranes are mainly used for containers, bulk cargo, groceries and bulk loading and unloading in dock loading and unloading areas. The product is suitable for a wide range of operating conditions, containers (A7), grabs (A8), groceries (A6), and large pieces (A3). The main operating mechanisms include: lifting, luffing, turning, walking, leg extension and jacking.
In response to the rapid development of electronic technology, continuous improvements in remote controls have enabled cranes to operate through wireless crane control during operation. The bridge crane pendant controls and the overhead crane pendant control are all the same type.
Both bridge crane pendant controls and overhead crane pendant control have the same advantages such as saving labor costs and increasing work efficiency. After adopting the wireless remote control, the ground commander is not needed, the operator can directly carry out the lifting operation, and the labor intensity is greatly reduced; the lifting operation is more convenient, quick and intuitive. And they are safe and reliable. The remote control is equipped with an emergency stop button. In any emergency, press the emergency stop button to cut off the main circuit power. When lifting, keep away from the items being lifted and keep away from the dangerous area. Only the operator can see the objects being lifted.
Construction personnel should wear complete safety labor protection articles and use seat belts correctly. Anyone who finds violations will immediately stop their work. Remove all power supply from the crane and hang the warning sign “No closing, construction in progress” until the machine is repaired. A safety warning line and a wall are installed at the maintenance site to ensure the normal operation of other equipment and there are obvious safety warning signs.
Correctly use the spreader and fix it securely, pay close attention to the installation equipment and the operation of the implement, especially the hoisting equipment, wire rope and strapping joints, such as the intact and firm fixed connection, the brake braking reliability and so on. On-site electric welding and various fire sites must have fire prevention measures, and all gas cutting electric welding work must be supervised by special personnel. Oxygen and acetylene bottles shall be placed in accordance with national regulations. Have full-time or part-time safety personnel to supervise safety requirements and ensure safety.
The main difference between the bridge crane pendant controls and the overhead crane pendant control is the type of crane applied. Different cranes operate in different situations, and the corresponding operators and controllers will have some changes. The bridge crane pendant controls and the overhead crane pendant control have their unique advantages in different situations.
Bridge crane pendant controls and overhead crane pendant control have similarities and differences. They have their own unique advantages for different occasions. If you don't know how to choose, you can consult us and we will give you better advice. We also provide Single speed crane control, Hoist pedant crane control, want to know more, just click us.